{"title":"Category - Punk","description":"","products":[{"product_id":"wild-cowboy-skull-lifestyle-leatherette-hat-patch","title":"Wild Cowboy Skull UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the Wild and Free Skull patch for hats! This eye-catching patch features a rebellious skull cowboy design, perfect for celebrating freedom and individuality.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429705802,"sku":"KCPatch-WILDFREE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_a9234e9f-c86f-4bea-9aae-2af4f83c8ab6.jpg?v=1769151753"},{"product_id":"fierce-demon-face-design-leatherette-hat-patch","title":"Fierce Demon Face Design UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDemon face patch for hats adds bold style and personality. Elevate your hat collection with this fierce, eye-catching patch design.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429476426,"sku":"KCPatch-DEVIL","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_b00d48d8-5616-4cf4-901c-f47569fc7d87.jpg?v=1769185398"},{"product_id":"floral-sugar-skull-art-leatherette-hat-patch","title":"Floral Sugar Skull Art UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eSkull patches are perfect for your unique hat style. This Floral Skull patch combines vibrant colors and intricate designs, ideal for celebrating Día de los Muertos or adding a touch of whimsy to any outfit.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429115978,"sku":"KCPatch-SKEL","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_a1fe694e-8796-4dc8-967b-c11b37116b5b.jpg?v=1769185954"},{"product_id":"dapper-skull-with-top-hat-leatherette-hat-patch","title":"Dapper Skull with Top Hat Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our unique skull hat patch, perfect for style enthusiasts! This striking top hat skull patch adds a bold statement to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429083210,"sku":"KCPatch-SKEL2","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_d32fa912-c888-460c-85e2-39a7e59161db.jpg?v=1769185960"},{"product_id":"patriotic-skull-cowboy-design-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Patriotic Skull Cowboy Design UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the ultimate hat patch for skull lovers! This unique Americana skull patch adds a bold statement to any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426691146,"sku":"KCPatchUV-SKULLCOWBOYHAT","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_eab1f14a-3b29-47ae-9fc9-e6b38d11d892.jpg?v=1769191084"},{"product_id":"texas-skull-with-sunglasses-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Texas Skull UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our eye-catching Texas skull patch, perfect for hats! This unique design celebrates Texas pride and makes a bold statement for any occasion.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426625610,"sku":"KCPatchUV-SKULLFLAG","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-03-12KCPatchUV-SKULLFLAG.jpg?v=1773331324"},{"product_id":"floral-skull-design-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Floral Skull Design UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eUnique Western-style hat patch featuring floral skull design. This beautiful skull and rose patch adds a touch of rustic charm to your favorite hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426166858,"sku":"KCPatchUV-FLORALCOWSKULL","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_0163c8d9-03f0-4e60-9e5c-3a1a0c53cf79.jpg?v=1769191792"},{"product_id":"caffeinated-attitude-and-sass-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Talk Back and Cuss Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eFor caffeine enthusiasts, this Talk Back patch is essential. Embrace your love for coffee and attitude with this stylish accessory, perfect for any hat!\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327425675338,"sku":"KCPatchE-TALKBACK","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_a52488dc-3ed0-4565-9982-570bc48c3b2a.jpg?v=1769196452"},{"product_id":"motherhood-fueled-by-coffee-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Motherhood Fueled by Coffee Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the perfect hat patch for coffee lovers! This unique \"Surviving Motherhood One Coffee at a Time\" patch adds a playful touch to your favorite hat and showcases your love for caffeine in style.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327425445962,"sku":"KCPatchE-MOTHERCOFFEE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_2c36a302-025a-4952-a3d1-08d09ae5610e.jpg?v=1769196941"},{"product_id":"caffeine-fueled-sassy-attitude-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Cuss Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eAdd personality to your attire with this unique hat patch. The Talk Back Caffeine patch is perfect for coffee lovers and those with a bold sense of style.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327425347658,"sku":"KCPatchE-CUSS","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_854a5992-39ca-4426-8786-b1840491b172.jpg?v=1769362985"},{"product_id":"skull-with-roses-design-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Skull with Roses Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eSkull hat patch perfect for edgy fashion enthusiasts. This intricately designed skull patch, surrounded by roses, adds a daring touch to any headwear, making it an ideal choice for those who embrace unique style.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327422890058,"sku":"KCPatchE-SKULLFLOWER","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-02-18KCPatchE-SKULLFLOWER.jpg?v=1771534260"},{"product_id":"skull-peace-smiley-face-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Skull Peace Smiley Face Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eShop unique hat patches for a stylish statement. This playful skeleton peace sign patch brings a fun vibe to your hat collection.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327422365770,"sku":"KCPatchE-SMILEPEACE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_18cbf499-cb6e-48b4-b1f7-b40c06c08050.jpg?v=1769619851"},{"product_id":"skull-mugshot-parent-humor-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Skull Mugshot Parent Humor Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eUnique hat patch for skull lovers and parents! This humorous \"My Child I Will Smile in My Mugshot\" patch adds a playful touch to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327420825674,"sku":"KCPatchE-SMILEMUGSHOT","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_62b76463-3fd8-4865-a89a-4207562e9c04.jpg?v=1769624065"},{"product_id":"embrace-your-day-fully-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Embrace Your Day Fully Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eExpress yourself with this unique hat patch design! The \"Have the Day You Deserve\" patch adds a playful touch to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327420760138,"sku":"KCPatchE-DAYDESERVE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_8652f13c-fdcb-42fa-9074-309b6743aefb.jpg?v=1769624184"},{"product_id":"floral-skull-design-uv-printed-leatherette-hat-patch-mr01","title":"Floral Skull UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover unique floral skull hat patches for distinctive style. Perfect for fans of edgy fashion, this eye-catching patch adds personality to your favorite cap.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327420629066,"sku":"KCPatchUV-BLUEFLORALSKULL","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_f41672fa-73cd-4f39-bb94-7e638944a6a9.jpg?v=1769624440"},{"product_id":"skeleton-hand-gesture-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Skeleton Hand Gesture Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eUnique skeleton hand patches enhance your hat collection. This bold skeleton design makes a statement, perfect for Halloween or any day you want to stand out.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327420465226,"sku":"KCPatchE-FLIPBIRDGREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_5cdf6512-8a7b-4793-bc70-58f3f218d406.jpg?v=1769624688"},{"product_id":"skull-surrounded-by-roses-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Orange Skull Surrounded by Roses Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our unique skull hat patch featuring vibrant roses! Perfect for adding a bold statement to any hat, this patch is ideal for those who love edgy accessories.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327419777098,"sku":"KCPatchE-SKULLFLOWERORANGE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-03-02KCPatchE-SKULLFLOWERORANGE.jpg?v=1772557756"},{"product_id":"expressive-salty-vibes-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Graffiti Salty UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eLooking for unique hat patches? This Salty graffiti patch adds a playful touch to any headwear.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327419220042,"sku":"KCPatchUV-SALTYPINK","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_03401edf-85a5-4760-8fcc-b172bf4432d8.jpg?v=1771287731"},{"product_id":"vibrant-alpha-graffiti-style-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Alpha Graffiti Style UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eThis vibrant ALPHA hat patch is perfect for trendsetters. Elevate your style and express your individuality with this eye-catching accessory.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327419088970,"sku":"KCPatchUV-ALPHA","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_6b943f8a-5584-4599-a6b3-0418305645d9.jpg?v=1771287699"},{"product_id":"bold-sigma-street-style-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Bold Sigma Street Style UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eExplore our vibrant SIGMA patch to elevate your style. Perfect for personalizing hats, this colorful design showcases bold creativity for statement-making outfits.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327418957898,"sku":"KCPatchUV-SIGMA","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_875c1878-9149-4aa1-9caa-30b7f79f0344.jpg?v=1771287633"},{"product_id":"skeleton-hand-number-patch-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Skeleton Hand 6-7 (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover unique hat patches for creative self-expression today! This Skeleton Hand patch adds a spooky charm to your favorite hat, perfect for Halloween enthusiasts or anyone looking to stand out in style.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327418630218,"sku":"KCPatchE-SIXSEVEN2","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_f690dd05-d840-4b49-af05-247ef5375671.jpg?v=1771287485"},{"product_id":"peaceful-skull-smile-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Peaceful Skull Smile (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover stylish hat patches that express your unique personality. This Peace Smile patch adds a fun touch to your hat collection.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327418564682,"sku":"KCPatchE-SMILEPEACESADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_03615e48-00fa-49a6-aa73-c9ee472d5d20.jpg?v=1771287349"},{"product_id":"chilling-smiley-with-bones-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Chilling Smiley with Bones (Grey) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover unique hat patches like this smiley skull design. Perfect for adding flair to your favorite accessories or expressing your individuality.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327418433610,"sku":"KCPatchE-SMILEPEACEGREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_cb2cc2be-928e-4cbc-b226-63d127fe3035.jpg?v=1771286802"},{"product_id":"skull-and-snake-motif-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Skull and Snake (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our unique skull and snake patch for hats. This edgy patch adds a bold touch to your favorite headwear, perfect for anyone who loves alternative fashion.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327418400842,"sku":"KCPatchE-SNAKESKELSADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_6cf69966-e698-4f4a-94df-40fc452c55f5.jpg?v=1771286790"},{"product_id":"psychedelic-skull-with-mushrooms-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Psychedelic Skull with Mushrooms UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eSkull mushroom patches are a unique and edgy accessory. Perfect for adding a dose of creativity and personality to your favorite hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Rawhide","offer_id":43310692433994,"sku":"KCPatchUV-MUSHROOMRAW","price":3.95,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43322738606154,"sku":"KCPatchUV-MUSHROOMBLACK","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_d42d5d53-582e-4adb-9bf6-45c5c822863e.jpg?v=1770948553"},{"product_id":"keep-it-to-a-minimum-flower-saddle-tan-engraved-leatherette-hat-patch-mr01","title":"Keep It to a Minimum Flower (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eExpress your unique style with this floral hat patch. This \"Let's Keep the Dumbfuckery to a Minimum\" patch adds a fun and quirky touch to any cap.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Saddle Tan","offer_id":43325380886602,"sku":"KCPatchE-DUMBFLOWERSADDLE","price":3.95,"currency_code":"USD","in_stock":true},{"title":"Rawhide","offer_id":43325380919370,"sku":"KCPatchE-DUMBFLOWERRAW","price":3.95,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":43325380952138,"sku":"KCPatchE-DUMBFLOWERGREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-02-06KCPatchE-DUMBFLOWERSADDLE.jpg?v=1771290671"},{"product_id":"floral-skull-design-uv-printed-leatherette-hat-patch-mr01-1","title":"Floral Skull Design UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eUnique Western-style hat patch featuring floral skull design. This beautiful skull and rose patch adds a touch of rustic charm to your favorite hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43319394893898,"sku":"KCPatchUV-FLORALCOWSKULL2RAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-02-06KCPatchUV-FLORALCOWSKULL2RAW.jpg?v=1771290775"},{"product_id":"skull-with-beer-vibes-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Skull with Beer (Rawhide) UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our vibrant skull patch for hat enthusiasts! This captivating design, featuring a decorated skull with beer mugs, adds a unique flair to your favorite headwear.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43319511023690,"sku":"KCPatchUV-SKULLMUGSRAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_59f25ff2-c75f-4fa6-831a-66b89ae13718.jpg?v=1771297981"},{"product_id":"surviving-with-a-smile-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Surviving with a Smile (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the ultimate spice patch for your hat collection! This Surviving Purely Out of Spite patch adds a playful flair to any outfit.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327392710730,"sku":"KCPatchE-SPITERAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_7c0429b9-992a-4fcf-94d6-4818060124b4.jpg?v=1771535643"},{"product_id":"smiling-through-adversity-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Surviving Out of Spite (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eShop our Surviving Pleasure patch for a unique hat accessory. Perfect for expressing your fun personality, this playful patch adds a splash of joy to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327392645194,"sku":"KCPatchE-SPITESADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_6092c9d4-d4a4-4392-98e0-72d16b10481d.jpg?v=1771535644"},{"product_id":"living-purely-out-of-spite-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Living Purely Out of Spite (Grey) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eExpress your style with this fun hat patch! This quirky, humorous patch featuring a melting smiley face adds a unique touch to your favorite headwear.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327392612426,"sku":"KCPatchE-SPITEGREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_425b6dfe-7b75-4164-bbdb-9f56efd5933b.jpg?v=1771535644"},{"product_id":"surviving-purely-out-of-spite-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Surviving Purely Out of Spite (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eStylish leather patches for hats are an essential accessory. This Surviving Purely Out of Spite patch adds a bold statement to any hat collection.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327392776266,"sku":"KCPatchE-SPITEPUNKRAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_544e2915-fe62-4bb4-aa11-2955d6721eef.jpg?v=1771535644"},{"product_id":"playful-honesty-about-appearances-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"The Boobs and Smile (Grey) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eTrendy hat patches for quirky style lovers are here! This humorous \"The Boobs Are Real, The Smile Is Fake\" patch adds a fun and cheeky touch to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327393136714,"sku":"KCPatchE-BOOBREAL2GREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_9a35507b-796e-42d0-b649-de58fd9544aa.jpg?v=1771535645"},{"product_id":"melting-joy-with-butterflies-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Melting Smiley with Butterflies (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eUnique ice cream hat patch design for trendy accessories! This playful melting ice cream patch adds a charming touch to any hat, perfect for expressing your fun style.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327393300554,"sku":"KCPatchE-SMILEDRIP1SADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_009c3e27-c65f-4b0d-8052-51e75c6d8bf4.jpg?v=1771535645"},{"product_id":"things-best-left-unsaid-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Things Best Left Unsaid (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our unique skeleton hand patch for hats that stands out. Perfect for adding a touch of edgy style, this patch is great for the bold and adventurous.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327397134410,"sku":"KCPatchE-UNSAID2SADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_96ac81b4-2742-43e4-b723-47fcc0254163.jpg?v=1771535645"},{"product_id":"caffeine-lovers-talk-back-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Caffeine Lovers Talk Back (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our unique caffeine patch for coffee lovers! This Talk Back patch adds personality to your favorite hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327397331018,"sku":"KCPatchE-TALKBACK2RAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_a49cffb0-2c5e-452d-9941-8d25a48580e5.jpg?v=1771535646"},{"product_id":"melting-smiley-with-butterflies-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Melting Smiley (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eThis quirky smiley face patch is perfect for hat enthusiasts. Add a splash of fun to your favorite headwear with this unique design featuring cheerful motifs and playful colors.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327393398858,"sku":"KCPatchE-SMILEDRIP1RAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_e94ff1d0-ddf6-4387-bbb3-737cc6d9d168.jpg?v=1771535646"},{"product_id":"choose-your-daddy-skeleton-hand-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Choose Your Daddy Skeleton (Grey) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eUnique Choose Your Daddy patch perfect for hat lovers! Show off your style with this eye-catching skeleton design that adds a playful touch to any fashion statement.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327393464394,"sku":"KCPatchE-CHOOSEDADGREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_c94768b5-a0e9-4e0b-bea5-330cfb933f9f.jpg?v=1771535646"},{"product_id":"silently-sweet-and-cheeky-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Better Left Unsaid (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eLooking for a unique hat patch? This playful \"Something's Better Left Unsad\" smiley patch adds charm to any style, perfect for spreading positivity and quirky vibes.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327397789770,"sku":"KCPatchE-UNSAID3SADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_0be515d7-8785-4a04-b99e-6517c726c37d.jpg?v=1771535647"},{"product_id":"real-boobs-fake-smile-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Real Boobs, Fake Smile (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eFunny hat patches are perfect for adding personality to your look. This cheeky \"The Boobs Are Real, The Smile Is Fake\" patch will make a bold statement on any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327394906186,"sku":"KCPatchE-BOOBREAL1RAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_5ec3d315-94da-40d9-bf27-a19ce32a2180.jpg?v=1771535655"},{"product_id":"playful-honesty-with-humor-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"The Boobs and Smile (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover unique hat patches for quirky style statements. This dripping smiley face patch adds a playful touch to any cap!\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327394938954,"sku":"KCPatchE-BOOBREAL2SADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_4b258327-85e4-438d-93d1-4784be42dcdb.jpg?v=1771535657"},{"product_id":"cheeky-smiley-face-humor-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Cheeky Smiley Face (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eUnique hat patches add personality to your favorite accessories. This playful \"Smile is Fake\" patch brings a fun twist to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327396413514,"sku":"KCPatchE-BOOBREAL2RAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_32af2f41-da14-4c8b-a992-f630c1eaee36.jpg?v=1771535699"},{"product_id":"choose-your-daddy-skeleton-vibes-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Choose Your Daddy Skeleton (Saddle Tan)  Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eChoose Your Daddy patch adds edgy style to any hat. Perfect for Halloween, casual wear, or expressing your unique personality.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327396446282,"sku":"KCPatchE-CHOOSEDADSADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_1fe8bd03-5b5e-4333-97d5-22e03e03a957.jpg?v=1771535700"},{"product_id":"nice-person-dont-push-button-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Nice Person, Don't Push Button (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our unique hat patch collection featuring witty designs! This \"I Am A Nice Person\" patch adds a humorous touch to your favorite hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327396872266,"sku":"KCPatchE-BUTTON1SADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_4bcb9506-e6c9-4109-87a8-15858348b223.jpg?v=1771535703"},{"product_id":"skeleton-on-boyfriends-nerve-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"On Boyfriend's Nerve (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eExpress your unique personality with this humorous skeleton patch. The \"On My Boyfriend's Last Nerve\" patch is a perfect accent for any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327396905034,"sku":"KCPatchE-BOYFNERVERAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_48338055-c6e8-4e33-a04a-f97d281aef22.jpg?v=1771535704"},{"product_id":"nice-person-dont-push-limits-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Nice Person, Don't Push Limits (Grey) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eFun hat patches for sassy personalities are here! This \"I Am A Nice Person\" patch makes a bold statement while adding a quirky touch to your favorite hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327396970570,"sku":"KCPatchE-BUTTON1GREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_9bf6f019-f0ee-4509-a068-a93a8ff17d6c.jpg?v=1771535705"},{"product_id":"skeleton-hand-leave-it-be-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Skeleton Hand Leave It Be (Grey) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eUnique hat patches for creative expression await you here. This \"Some Things Are Better Left Unsaved\" skeleton patch is perfect for adding a quirky touch to your hat collection.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327397822538,"sku":"KCPatchE-UNSAID2GREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_d2693a2f-f665-4d2c-a4a3-fc08e4c38f61.jpg?v=1771535722"},{"product_id":"playful-reminder-to-stay-silent-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Better Left Unsaid Smiley (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eFun hat patches for unique style and self-expression! This quirky \"Something's Are Better Left Unsaid\" patch adds a playful touch to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327398051914,"sku":"KCPatchE-UNSAID3RAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_e0a874ec-3f58-4dc3-bcc7-02f828db8f1f.jpg?v=1771535717"},{"product_id":"playful-reminder-stay-mysterious-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Better Left Unsaid Smiley (Grey) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eFunny hat patch for creative hat enthusiasts! This \"Something's Better Left Unsad\" patch brings a quirky touch to any hat, perfect for those who love to express their unique style.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327397920842,"sku":"KCPatchE-UNSAID3GREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_b0ace966-116d-4f68-a505-3c078029f988.jpg?v=1771535725"},{"product_id":"colorful-sugar-skull-design-uv-printed-leatherette-hat-patch-mr01","title":"Colorful Sugar Skull Design UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover colorful sugar skull patches for fun hat customization. Perfect for celebrating Día de los Muertos or adding a vibrant touch!\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327408930890,"sku":"KCPatchUV-SKULLSMILERAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_5436d9c9-fb9a-4689-a57d-8705c81a4c75.jpg?v=1771536350"}],"url":"https:\/\/www.ink-and-ember.com\/collections\/category-patriotic-copy.oembed?page=2","provider":"Ink and Ember","version":"1.0","type":"link"}