{"title":"Category - Alcohol","description":"","products":[{"product_id":"beer-mug-uv-printed-leatherette-hat-patch-mr01","title":"Beer Mug UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43245015924810,"sku":"KCPatch-BEERMUG","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2023-11-08KCPatch-BEERMUG.jpg?v=1768843839"},{"product_id":"garage-life-and-drinking-leatherette-hat-patch","title":"Garage Life and Drinking Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the ultimate garage drinker patch for hat enthusiasts. This fun and quirky patch showcases a playful beverage character, adding a unique touch to any headwear.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429410890,"sku":"KCPatch-GARAGE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-03-12KCPatch-GARAGE.jpg?v=1773331116"},{"product_id":"patriotic-canned-beverage-art-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Patriotic Canned Beverage Art UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate American pride with our Patriotic Beer Cans patch. This unique hat patch showcases three iconic beer cans adorned with the Stars and Stripes, perfect for any occasion.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427313738,"sku":"KCPatchUV-FLAGBEERCANS","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_e426cef7-8efa-4955-bb05-24dd860e5e43.jpg?v=1769190201"},{"product_id":"cheers-to-wild-shenanigans-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Cheers to Wild Shenanigans UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eExplore our Bad and Boozy hat patch for a fun twist! Perfect for St. Patrick's Day or any celebration, this vibrant patch brings a playful spirit to your favorite hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427018826,"sku":"KCPatchUV-STPAT19","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_0bdbc021-dfd1-4fad-8f54-502da2ca380e.jpg?v=1769190580"},{"product_id":"call-me-old-fashioned-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Call Me Old Fashioned UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the perfect Old Fashioned patch for cocktail lovers! Elevate your hat game with this stylish and fun patch.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426986058,"sku":"KCPatchUV-OLDFASHION2","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_0f24cd23-5428-421a-b593-ea4c78fce5e3.jpg?v=1769190718"},{"product_id":"st-patricks-day-cheers-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"St. Patrick's Day Cheers! UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate St. Patrick's Day with this fun Drinking Team patch. Perfect for showcasing your festive spirit and love for craft beer, this patch is a must-have accessory for any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426887754,"sku":"KCPatchUV-STPAT13","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_5345e9ba-c9cc-4bc0-b96c-26ada39e538c.jpg?v=1769190719"},{"product_id":"kentucky-pride-and-heritage-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Kentucky Pride and Heritage Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eKentucky hat patch, perfect for bourbon lovers and sports fans! Celebrate the Kentucky Derby, bluegrass music, and southern culture with this unique patch.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327425839178,"sku":"KCPatchE-KYPRINTLG","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_b9a60e53-c61b-4e4e-927d-3956eff54c91.jpg?v=1769195980"},{"product_id":"celebrate-st-patricks-day-fun-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Drink Drank Drunk UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eStylish drink patch for casual or festive occasions. This Drink Drank Drunk patch adds a playful touch to any hat, perfect for St Patricks Day celebrations or everyday wear.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327424856138,"sku":"KCPatchUV-STPAT14","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_93e90e3a-df72-4666-bae7-972452995c5e.jpg?v=1769368394"},{"product_id":"celebrate-st-patricks-day-cheer-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Lets Get Lucked Up UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate St. Patrick's Day with this Lucky Beer patch! Featuring a vibrant green beer design, this patch is perfect for adding a festive touch to your hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327424757834,"sku":"KCPatchUV-STPAT29","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_355a683c-ee81-45bc-ad3f-76b4a1e3f77c.jpg?v=1769369336"},{"product_id":"beer-and-irish-spirit-humor-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Irish in a Few Beers UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate St. Patrick's Day with this fun beer patch! Perfect for beer enthusiasts, this playful design adds a touch of humor to your hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327424725066,"sku":"KCPatchUV-STPAT18","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_246dd277-7d48-4f0d-aafe-69fc2b65f63d.jpg?v=1769369453"},{"product_id":"beer-and-shenanigans-vibes-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Beer and Shenanigans UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eFuel your adventures with this fun beer patch! Perfect for beer enthusiasts, this vibrant \"Fueled by Beer and Shenanigans\" patch brings a lively twist to any hat for St Patricks Day.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327424692298,"sku":"KCPatchUV-STPAT21","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_9cf688e5-5ffc-4e44-9392-1f17ed4ead38.jpg?v=1769369460"},{"product_id":"celebrate-st-patricks-day-fun-uv-printed-leatherette-hat-patch-mr01","title":"Celebrate St. Patrick's Day UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate St. Patrick's Day with this Lucked Up patch! Perfect for adding festive flair to your favorite hats, this charming design features a green beer mug and leprechaun hat, ideal for all beer and holiday enthusiasts.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327424528458,"sku":"KCPatchUV-STPAT7","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_f217eefe-a779-4ef0-9bbc-ee5ada205174.jpg?v=1769444418"},{"product_id":"irish-cheer-with-beers-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Irish Cheer In a Few Beers UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eSt. Patrick's Day hat patch for festive celebrations! This whimsical Irish beer patch adds charm and fun to any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327424430154,"sku":"KCPatchUV-STPAT31","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_68109460-6a6d-4f25-9908-8f1fb7909025.jpg?v=1769445129"},{"product_id":"shut-up-liver-youre-fine-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Shut Up Liver, You're Fine UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eShop our unique beer lover hat patch today! Perfect for celebrating St. Patrick's Day or any festive occasion, this \"Shut Up Liver You're Fine\" patch adds a humorous touch that's sure to spark conversations.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327424364618,"sku":"KCPatchUV-STPAT8","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-03-16KCPatchUV-STPAT8.jpg?v=1773676555"},{"product_id":"celebrate-st-patricks-day-festivities-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Get Shamrocked Clover UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate St. Patrick's Day with this Shamrock hat patch! Featuring a cheerful clover character raising a beer, this patch is perfect for holiday festivities or casual wear.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327424331850,"sku":"KCPatchUV-STPAT5","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_b7009e2e-d6b0-41bc-956b-b76883a74daa.jpg?v=1769445248"},{"product_id":"cheers-to-bad-and-boozy-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Bad and Boozy UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate St. Patrick's Day with this Bad and Boozy patch. Perfect for adding a touch of festive fun to your favorite hat!\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327424299082,"sku":"KCPatchUV-STPAT9","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_b35eb4c0-de40-4804-ab51-c2890557bdfd.jpg?v=1769445378"},{"product_id":"get-lucky-with-beer-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Get Lucky with Beer UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate St. Patrick's Day with this vibrant Lucked Up patch. This fun beer-themed patch adds a festive touch to any hat, making it perfect for gatherings and celebrations.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327424266314,"sku":"KCPatchUV-STPAT12","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_864b8a9f-6aef-44c5-867c-af445caf2bd9.jpg?v=1769445379"},{"product_id":"st-patricks-day-cheers-uv-printed-leatherette-hat-patch-mr01-1","title":"St. Patrick's Day Drinks UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate St. Patrick's Day with this fun drink patch! Featuring festive cocktails, this charming patch adds a playful touch to any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327424200778,"sku":"KCPatchUV-STPAT26","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_57caa03e-6c5f-4e36-8bab-61f8bdcc8ca7.jpg?v=1769445495"},{"product_id":"old-fashioned-drink-humor-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Old Fashioned Drink UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eThis Old Fashioned cocktail patch is perfect for hat enthusiasts. Add style and personality to your favorite hat while showcasing your love for classic cocktails.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327423643722,"sku":"KCPatchUV-OLDFASHION","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_13004edf-685b-4ecd-adc3-00218a7b7fe6.jpg?v=1769446412"},{"product_id":"irish-pride-party-tomorrow-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Irish Pride, Party Tomorrow UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the fun Irish Today Hungover Tomorrow patch! This unique patch adds personality to any hat, perfect for St. Patrick's Day or casual festivities.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327422693450,"sku":"KCPatchUV-STPAT16","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_e208fde3-88af-455d-8094-f3c98fbfca22.jpg?v=1769450380"},{"product_id":"cheers-to-bad-and-boozy-uv-printed-leatherette-hat-patch-mr01","title":"Cheers to Bad and Boozy UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the ultimate beer-themed hat patch for enthusiasts! This Bad and Boozy patch captures the fun spirit of celebrations.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327422660682,"sku":"KCPatchUV-STPAT15","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_6a19926f-0ed7-4efe-b369-5f59e4c1dd25.jpg?v=1769450535"},{"product_id":"irish-spirit-and-tomorrows-hangover-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Irish Today and Tomorrow's Hangover UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate Irish culture with this fun hat patch! Featuring a cheeky beer design, this Irish Patch is perfect for St. Patrick's Day celebrations or everyday wear.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327422627914,"sku":"KCPatchUV-STPAT27","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_039f5261-3881-40a0-81f7-8e047c7c2e5e.jpg?v=1769450554"},{"product_id":"st-patricks-day-party-vibes-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Bad Boozy UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the ultimate Bad and Boozy hat patch! Perfect for St. Patrick's Day celebrations or any occasion to showcase your fun side.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327422595146,"sku":"KCPatchUV-STPAT22","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_9248d949-f545-473a-9b9e-c4cb9e393a9b.jpg?v=1769450572"},{"product_id":"cheers-to-st-patricks-day-uv-printed-leatherette-hat-patch-mr01","title":"Cheers to St. Patrick's Day! UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our unique drink up patch for hats! This bold and playful hat patch adds a fun touch for any celebration or casual outing.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327422562378,"sku":"KCPatchUV-STPAT23","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_f776d321-3f72-46c0-ae8f-d20c5f4fc6e3.jpg?v=1769450596"},{"product_id":"st-patricks-day-shenanigans-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"St. Patrick's Day Shenanigans UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eIntroducing the perfect hat patch for party lovers! This vibrant \"Drink Drank Drunk\" patch adds a playful touch to any hat style.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327422529610,"sku":"KCPatchUV-STPAT25","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_6b09a807-05e8-4d9b-90e0-bda20fceb275.jpg?v=1769451682"},{"product_id":"alcohol-awareness-humor-patch-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Alcohol Awareness Checkbox Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eFunny and quirky hat patches for party lovers! This Are You Drunk? patch is the perfect conversation starter for any social gathering.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327422169162,"sku":"KCPatchE-DRUNKCHECKBOX","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-04-02KCPatchE-DRUNKCHECKBOX.jpg?v=1775146782"},{"product_id":"kentucky-bourbon-vibes-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Kentucky Bourbon Plate UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the perfect hat patch for bourbon enthusiasts! This Kentucky Bourbon patch adds a touch of southern charm to your favorite headwear.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327420858442,"sku":"KCPatchUV-BOURBONPLATE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-04-16KCPatchUV-BOURBONPLATE.jpg?v=1776366115"},{"product_id":"rustic-kentucky-state-silhouette-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Kentucky State Bourbon Barrel UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eKentucky-themed hat patch for proud locals and enthusiasts. This rustic wooden design celebrates the beauty and heritage of Kentucky.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327419875402,"sku":"KCPatchUV-PRINTBOURBONBARREL","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-03-02KCPatchUV-PRINTBOURBONBARREL.jpg?v=1772469153"},{"product_id":"patriotic-beer-can-trio-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Patriotic Beer Can Trio UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eShow off your patriotism with this American flag patch. Perfect for celebrating holidays, events, or simply adding flair to your hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327419646026,"sku":"KCPatchUV-FLAGBEERCANWHITE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_613f6a43-89fe-428b-a16f-e02962378013.jpg?v=1771287767"},{"product_id":"kentucky-blues-license-vibes-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Kentucky Bourbon Plate UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eEnhance your style with this Kentucky BRBN hat patch! Show off your love for bourbon and Kentucky pride in a unique way.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327419023434,"sku":"KCPatchUV-BRBNPLATE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_3a39b68a-1dd6-45d9-af93-0e446ca8231d.jpg?v=1771287655"},{"product_id":"kentucky-whiskey-vibes-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Kentucky Whiskey Plate UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover this Kentucky Whiskey patch, perfect for hat lovers! Celebrate your passion for bourbon culture and showcase your love for whiskey.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327418990666,"sku":"KCPatchUV-WHISKEYPLATE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_99cfe2b2-7038-4c72-9c07-5a1a2e5640d4.jpg?v=1771287643"},{"product_id":"kentucky-whiskey-vibes-uv-printed-leatherette-hat-patch-mr01","title":"Kentucky Whiskey UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our Kentucky WSKY patch, perfect for hat enthusiasts! This vibrant patch adds a touch of state pride and style to any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327418695754,"sku":"KCPatchUV-WSKYPLATE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_21534d35-7ef1-4774-90b1-ac5ec287d035.jpg?v=1771287505"},{"product_id":"kentucky-bourbon-love-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Kentucky Bourbon Plate UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eKentucky bourbon enthusiasts will love this stylish patch. Featuring a retro license plate design, this patch adds a unique touch to any hat, perfect for celebrating Kentucky’s rich bourbon heritage.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"BURBUN","offer_id":43309487947850,"sku":"KCPatchUV-BURBUNPLATE","price":3.95,"currency_code":"USD","in_stock":true},{"title":"BUHRBON","offer_id":43319407214666,"sku":"KCPatchUV-BUHRBONPLATE","price":3.95,"currency_code":"USD","in_stock":true},{"title":"BBN","offer_id":43319407280202,"sku":"KCPatchUV-BBNPLATE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_742ad4ae-05f4-44b5-b0ce-cde1f6879477.jpg?v=1771287460"},{"product_id":"classic-cocktail-enthusiast-design-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Call Me Old Fashioned (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eElevate your style with this Old Fashioned patch. Perfect for cocktail enthusiasts, this stylish accessory adds a touch of vintage charm to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327416434762,"sku":"KCPatchE-OLDFASHION4RAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_e7d49f53-0603-4366-bf07-6bf18bc924cb.jpg?v=1771284612"},{"product_id":"kentucky-whiskey-barrel-silhouette-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Kentucky Whiskey Barrel UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eShow your state pride with this unique Kentucky barrel patch! Perfect for adding a touch of Southern charm to any hat, this patch celebrates Kentucky's rich bourbon heritage.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327415648330,"sku":"KCPatchUV-BOURBARRELFILL","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_57f5e1c2-73ec-4bd7-861f-9ef92661b661.jpg?v=1770927967"},{"product_id":"call-me-old-fashioned-uv-printed-leatherette-hat-patch-mr01","title":"Call Me Old Fashioned UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our stylish Old Fashioned cocktail patch for hats! This vibrant patch is perfect for cocktail enthusiasts and adds a unique flair.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327413387338,"sku":"KCPatchUV-OLDFASHION3WHITE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_14e8451e-c735-4fe7-bcb4-d62c69303af6.jpg?v=1770927499"},{"product_id":"party-hops-with-beer-cheers-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Party Hops with Beer Cheers UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eGrab this fun beer-loving patch to enhance any hat! Perfect for craft beer enthusiasts, this vibrant patch adds a playful touch to your collection.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327409782858,"sku":"KCPatchUV-HOPSMAN","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_bc78b94e-9625-4a51-8fc3-df488c78f132.jpg?v=1770948452"},{"product_id":"liver-encouragement-humor-patch-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Liver Encouragement (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eLiver-themed patches are perfect for quirky hat lovers. This \"Shut Up Liver, You Are Just Fine\" patch adds humor and style to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327408275530,"sku":"KCPatchE-LIVERFINE2RAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_a028183a-a49c-4465-b4fb-b89418e30082.jpg?v=1770948471"},{"product_id":"bourbon-glass-gold-engraved-leatherette-hat-patch","title":"Bourbon Glass Engraved Leatherette Hat Patch - MR01 (Choose Your Color)","description":"\u003cp\u003eStylish hat patches are a must-have for unique flair. This fashionable patch features a bourbon glass and ice, perfect for adding character to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Rustic Gold","offer_id":43310689189962,"sku":"KCPatchE-BOURBONGLASSBRONZE","price":3.95,"currency_code":"USD","in_stock":true},{"title":"Saddle Tan","offer_id":43322753220682,"sku":"KCPatch-BOURBONGLASS","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_f74420b9-10a6-4fb5-8ace-655e15798977.jpg?v=1770948497"},{"product_id":"coffee-over-beer-preference-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Coffee Over Beer (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eCoffee patches are perfect for coffee lovers everywhere. Showcase your passion with this fun and quirky hat patch!\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327404933194,"sku":"KCPatchE-COFFEEBEERSADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_a527d521-79cd-4733-b0f4-4370c1b9f1f6.jpg?v=1770948513"},{"product_id":"fueled-by-bourbon-mischief-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Fueled by Bourbon UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eBourbon hat patch enthusiasts will love this unique design. Celebrate your love for whiskey with the Fueled by Bourbon patch, perfect for adding personality to any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327404900426,"sku":"KCPatchUV-FUELBOURBONWHITE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_4a189399-9049-49e5-b8b0-7dc00b81f958.jpg?v=1770948514"},{"product_id":"that-i-wine-though-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"That  Wine Though (Grey) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eElevate your hat game with this wine patch! Perfect for wine lovers, this stylish \"That I Wine Though\" patch adds a playful touch to any cap.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43310690107466,"sku":"KCPatchE-THATWINEGREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_6a8f06f6-1c7a-4313-9888-f1cbbf2729f2.jpg?v=1770948515"},{"product_id":"show-me-the-wine-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Show Me The Wine UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eShow me the wine with this stylish hat patch! Perfect for wine lovers, this eye-catching patch adds a fun and personalized touch to any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327404572746,"sku":"KCPatchUV-SHOWWINESAND","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_bdde8be9-3dff-4dd2-bcd4-06e695b3a912.jpg?v=1770948545"},{"product_id":"wine-enthusiast-humor-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Wine Enthusiast (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover this charming wine-themed patch for hat lovers! Perfect for wine enthusiasts and those who appreciate clever humor, this \"That I Wine Though\" patch adds a delightful touch to any outfit.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327404441674,"sku":"KCPatchE-THATWINERAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_f2e02278-de00-4b5f-aed6-43ff7e41ff3c.jpg?v=1770948548"},{"product_id":"humorous-liver-encouragement-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Shut Up Liver (Grey) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eFunny hat patches bring joy to any outfit! This \"Shut Up Liver, You're Fine\" patch adds a humorous touch that celebrates good times and spirited conversations.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327404048458,"sku":"KCPatchE-LIVERFINEGREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_30b18530-59eb-40d7-a2d4-97a9960c81c8.jpg?v=1770948560"},{"product_id":"hops-bull-mascot-patch-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Beer Hops Bull UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover unique hat patches for beer enthusiasts! This Hop Bull patch adds a vibrant touch to your favorite hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327403589706,"sku":"KCPatchUV-HOPSBULLRAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_e67d7a4b-f8d7-448b-b221-be827c47512e.jpg?v=1770948576"},{"product_id":"stay-calm-youre-fine-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Shut Up Liver (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eShop fun hat patches for a quirky style! This witty 'Shut Up Liver, You're Fine' patch adds personality to any hat and is perfect for those who love humor and casual flair.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327403491402,"sku":"KCPatchE-LIVERFINESADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_eede33f4-d735-4e00-96e0-5f1511b95764.jpg?v=1770948581"},{"product_id":"humorous-liver-health-reminder-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Shut Up Liver (Rawhide) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eShop unique and stylish liver patches for your hats! This humorous 'Shut Up Liver You're Fine' patch adds personality to any cap.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327403262026,"sku":"KCPatchE-LIVERFINERAW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_2ec183e0-2471-4f83-bd33-cbd904750f65.jpg?v=1770948594"},{"product_id":"doctors-orders-for-glasses-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Drs Orders Wine (Grey) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eShopping for funny hat patches? Check out this \"I Need Glasses\" patch, perfect for cocktail enthusiasts who love to show off their quirky sense of humor. Ideal for parties or casual outings, this patch adds a fun touch to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327403196490,"sku":"KCPatchE-DRWINEGREY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_c8825384-13fd-4cb9-82a6-07f3a49f5c83.jpg?v=1770948597"},{"product_id":"liver-health-encouragement-humor-engraved-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Liver Health (Saddle Tan) Engraved Leatherette Hat Patch - MR01","description":"\u003cp\u003eLooking for fun hat patches? This Shut Up Liver patch adds humor and personality to any hat.\u003c\/p\u003e\n\u003cp\u003eEngraved on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are engraved on leather to give a clean and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327403130954,"sku":"KCPatchE-LIVERFINE2SADDLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_fa3dcce4-8f5b-459e-b8a4-e329f331f036.jpg?v=1770948598"}],"url":"https:\/\/www.ink-and-ember.com\/collections\/kentucky-copy.oembed?page=2","provider":"Ink and Ember","version":"1.0","type":"link"}