{"title":"UV Printed Maker Space Items","description":"","products":[{"product_id":"custom-uv-printed-leather-or-acrylic-patches-wholesale-packages","title":"Custom UV Printed Leather or Acrylic Hat Patches - Bulk Packages KC","description":"\u003cp\u003eThese Custom Logo Patches for Trucker Hats are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine. Our patches are a maximum of 3\" wide or tall, whichever is greatest depending on your design. Typically we recommend about an 1\/8\" contour of leather to show around it like the images shown. Upon purchase you will need to send the high res image you would like to have printed along with the size specifications you prefer, any other sizes over the standard six square inches contact us directly. Your image should be high resolution, preferably in a vector file format (SVG, AI, etc) which allows us to easily convert it to a cut file. If your file is not considered high res or needs significant work there may be an additional charge of $15 to adjust your artwork.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe only use Lonestar Adhesive leatherette as their product is thicker, more durable, and has a stronger adhesive than anyone else on the market.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eApplication instructions:\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOrdering Notes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePurchase price includes basic setup.\u003c\/li\u003e\n\u003cli\u003eAfter purchase we will contact you to discuss your artwork and patch size requirements.\u003c\/li\u003e\n\u003cli\u003eTypically we do an 1\/8\" contour exposing the leather underneath creating a patch 1\/4\" larger than your design. If you prefer something different reach out and and discuss.\u003c\/li\u003e\n\u003cli\u003eDefault overall patch size is limited to 6\" square dimensions (2\"x3\" for example)\u003c\/li\u003e\n\u003cli\u003eVector files are best but we can work with high resolution bitmaps as well.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHats are not included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOrder Name should be reflective of the name of the artwork or logo, please include this even if you have previously sent us the design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eIf \"Other\" is selected, this material is subject to availability and possibly longer processing time. A color swatch is included in the photo gallery to select your color. Enter it in the \"Other Color\" text box\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ink and Ember","offers":[{"title":"Rawhide","offer_id":41947025965130,"sku":"IAECUSTUVPATCH-PREMRAW","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Glossy Black","offer_id":41947026030666,"sku":"IAECUSTUVPATCH-GLSBLK","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Glossy White","offer_id":42022703923274,"sku":"IAECUSTUVPATCH-GLSWHT","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":43215187738698,"sku":"IAECUSTUVPATCH-GRY","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Rustic","offer_id":41947026128970,"sku":"IAECUSTUVPATCH-RUSTIC","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Saddle Tan","offer_id":41947026096202,"sku":"IAECUSTUVPATCH-SADDLE","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Rawhide","offer_id":43215187771466,"sku":"IAECUSTUVPATCH-HERRAW","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Black","offer_id":43215187804234,"sku":"IAECUSTUVPATCH-HERBLK","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Heritage White","offer_id":43240326496330,"sku":"IAECUSTUVPATCH-HERWHT","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Charcoal","offer_id":41947025997898,"sku":"IAECUSTUVPATCH-HERCHARC","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Flint","offer_id":43215187837002,"sku":"IAECUSTUVPATCH-HERFLINT","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Sand","offer_id":41947026063434,"sku":"IAECUSTUVPATCH-HERSAND","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Olive","offer_id":43215187869770,"sku":"IAECUSTUVPATCH-HEROLIVE","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Other Leatherette","offer_id":41947026161738,"sku":"IAECUSTUVPATCH-OTHLEAT","price":8.0,"currency_code":"USD","in_stock":true},{"title":"Other Acrylic","offer_id":41947026194506,"sku":"IAECUSTUVPATCH-OTHACR","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/20240620_133744.jpg?v=1740102145"},{"product_id":"uv-printed-turkey-tail-feather-patches","title":"UV Printed Turkey Tail Feather Patches - MR01","description":"\u003cp\u003eThese UV printed patches will look great for your hunting club, preservation club, or if you are an avid outdoorsman that love to call in the thunder chickens on your days off. Spring is just around the corner and soon you'll be in the woods and fields chasing these elusive game birds. \u003c\/p\u003e\n\u003cp\u003eWe offer three versions for your purchasing, and all are printed on Lonestar Saddle Tan with adhesive and engraving templates can be provided upon request. \u003c\/p\u003e\n\u003cp\u003eOption 1 is a full set of turkey tom tail feathers in full strut with a slight relief of saddle tan exposed\u003c\/p\u003e\n\u003cp\u003eOption 2 has a small engravable area about 1 inch in diameter in the center, resembling a turkey tail feather mount\u003c\/p\u003e\n\u003cp\u003eOption 3 has a larger area for engraving below the tail feathers allowing for more customization\u003c\/p\u003e\n\u003cp\u003eAll patches measure 2.5\" tall\u003c\/p\u003e\n\u003cp\u003eHat photo is just a mockup photo and is not included in the purchase of this product.\u003c\/p\u003e","brand":"Ink and Ember","offers":[{"title":"Option 1: Full Image","offer_id":41960457863242,"sku":"KCPATCH-TurkeyTail1","price":3.95,"currency_code":"USD","in_stock":true},{"title":"Option 2: Engravable Circle","offer_id":41960457896010,"sku":"KCPATCH-TurkeyTail2","price":3.95,"currency_code":"USD","in_stock":true},{"title":"Option 3: Engravable Larger Area","offer_id":41960457928778,"sku":"KCPATCH-TurkeyTail3","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/turkeytailfeatherscollagepatches.png?v=1740687315"},{"product_id":"florida-flag-patch","title":"State Shape Flag Patches - Pick Your State - MR01","description":"\u003cp\u003eThese are printed on your choice of Heritage Sand or Walnut Lonestar leatherette with a relief around the edges giving some nice contrast and depth to the design, making it a great option to coordinate colors with different styles and colors of hats. \u003c\/p\u003e\n\u003cp\u003eEach patch is cut out at 1\/8\" contour around the inner flag shape and will either be a 2.5\" tall patch or a 3\" wide patch. \u003c\/p\u003e","brand":"Ink and Ember","offers":[{"title":"Rawhide","offer_id":43232131973194,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Glossy Black","offer_id":43232132005962,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Glossy White","offer_id":43232132038730,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":43232132071498,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Rustic","offer_id":43232132104266,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Saddle Tan","offer_id":43232132137034,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Dark Brown","offer_id":43232132169802,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Heritage Rawhide","offer_id":43232132202570,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Heritage Black","offer_id":43232132235338,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Heritage Charcoal","offer_id":43232132268106,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Heritage Flint","offer_id":43232132300874,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Heritage Sand","offer_id":42252103123018,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Heritage Olive","offer_id":43232132333642,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Heritage Walnut","offer_id":42502752043082,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true},{"title":"Other Leatherette","offer_id":43232132366410,"sku":null,"price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/20250711_163249.jpg?v=1757039407"},{"product_id":"sample-set-uv-patches","title":"Sample Set of UV Printed Patches","description":"\u003ch2 data-start=\"191\" data-end=\"251\"\u003eUV Printed Patch Sample Set — For Client Demos\u003c\/h2\u003e\n\u003cp data-start=\"253\" data-end=\"464\"\u003eLooking for high-quality samples to showcase to your customers? Our \u003cstrong data-start=\"321\" data-end=\"352\"\u003eUV Printed Patch Sample Set\u003c\/strong\u003e is designed for businesses who want to test, display, or pre-sell custom patches before placing a full order.\u003c\/p\u003e\n\u003cp data-start=\"466\" data-end=\"701\"\u003eWith this set, you'll receive \u003cstrong data-start=\"496\" data-end=\"519\"\u003efour sample patches\u003c\/strong\u003e, each UV printed on premium leatherette and precisely laser-cut to demonstrate the vibrant colors, crisp detail, and professional finish you can expect from a full production run.\u003c\/p\u003e\n\u003cp data-start=\"703\" data-end=\"840\"\u003eWe’ll select a mix of leatherette colors from our stocked options.\u003c\/p\u003e\n\u003ch3 data-start=\"842\" data-end=\"862\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 data-start=\"842\" data-end=\"862\"\u003eWhat’s Included:\u003c\/h3\u003e\n\u003cul data-start=\"863\" data-end=\"1142\"\u003e\n\u003cli data-start=\"863\" data-end=\"898\"\u003e\n\u003cp data-start=\"865\" data-end=\"898\"\u003e\u003cstrong data-start=\"865\" data-end=\"896\"\u003e4 UV Printed Sample Patches\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"899\" data-end=\"1010\"\u003e\n\u003cp data-start=\"901\" data-end=\"1010\"\u003eUp to \u003cstrong data-start=\"907\" data-end=\"921\"\u003e3” in size\u003c\/strong\u003e (either width or height), with our signature \u003cstrong data-start=\"967\" data-end=\"988\"\u003e1\/8” contour edge\u003c\/strong\u003e for a polished look\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1011\" data-end=\"1076\"\u003e\n\u003cp data-start=\"1013\" data-end=\"1076\"\u003e\u003cstrong data-start=\"1013\" data-end=\"1044\"\u003eAssorted leatherette colors \u003c\/strong\u003ewill be included if we have them on hand\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1077\" data-end=\"1142\"\u003e\n\u003cp data-start=\"1079\" data-end=\"1142\"\u003eReady for hats, bags, or any hard goods you plan to customize\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1149\" data-end=\"1171\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 data-start=\"1149\" data-end=\"1171\"\u003eAbout Our Patches:\u003c\/h3\u003e\n\u003cul data-start=\"1172\" data-end=\"1430\"\u003e\n\u003cli data-start=\"1172\" data-end=\"1292\"\u003e\n\u003cp data-start=\"1174\" data-end=\"1292\"\u003e\u003cstrong data-start=\"1174\" data-end=\"1221\"\u003eUV Printed on Lonestar Adhesive Leatherette\u003c\/strong\u003e — known for its durability, thickness, and superior adhesive backing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1293\" data-end=\"1374\"\u003e\n\u003cp data-start=\"1295\" data-end=\"1374\"\u003e\u003cstrong data-start=\"1295\" data-end=\"1322\"\u003eHeat-activated adhesive\u003c\/strong\u003e for easy application to hats, backpacks, and more\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1375\" data-end=\"1430\"\u003e\n\u003cp data-start=\"1377\" data-end=\"1430\"\u003eVegan leather finish with a professional-grade hold\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1437\" data-end=\"1463\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 data-start=\"1437\" data-end=\"1463\"\u003eHeat Application Tips:\u003c\/h3\u003e\n\u003cul data-start=\"1464\" data-end=\"1621\"\u003e\n\u003cli data-start=\"1464\" data-end=\"1506\"\u003e\n\u003cp data-start=\"1466\" data-end=\"1506\"\u003ePreheat item before applying the patch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1507\" data-end=\"1569\"\u003e\n\u003cp data-start=\"1509\" data-end=\"1569\"\u003eWarm adhesive on the patch with a heat gun before pressing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1570\" data-end=\"1621\"\u003e\n\u003cp data-start=\"1572\" data-end=\"1621\"\u003eUse a hat press or flat heat press for best adhesion\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1628\" data-end=\"1647\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3 data-start=\"1628\" data-end=\"1647\"\u003eOrdering Notes:\u003c\/h3\u003e\n\u003cul data-start=\"1648\" data-end=\"1858\"\u003e\n\u003cli data-start=\"1648\" data-end=\"1731\"\u003e\n\u003cp data-start=\"1650\" data-end=\"1731\"\u003eThis sample set is intended for \u003cstrong data-start=\"1682\" data-end=\"1729\"\u003ebusiness owners, customizers, and resellers\u003c\/strong\u003e\u003cstrong data-start=\"1682\" data-end=\"1729\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1865\" data-end=\"2030\"\u003eIf you need a full production quote or want custom designs printed on your samples, you can find those here — we’re happy to help you bring your vision to life : \u003ca href=\"https:\/\/www.ink-and-ember.com\/products\/custom-uv-printed-leather-or-acrylic-patches-wholesale-packages-kc?_pos=1\u0026amp;_sid=436f80d20\u0026amp;_ss=r\" target=\"_blank\" title=\"Ink and Ember UV Printed Bulk Patches for Trucker Hats\" rel=\"noopener\"\u003ehttps:\/\/www.ink-and-ember.com\/products\/custom-uv-printed-leather-or-acrylic-patches-wholesale-packages-kc\u003c\/a\u003e\u003c\/p\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":42287697952842,"sku":"SAMPLEUVSETOF4","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/20240620_133744.jpg?v=1740102145"},{"product_id":"custom-texture-raised-uv-printed-leatherette-patches-wholesale-packages-kc","title":"Custom Texture Raised UV Printed Leatherette Patches - Wholesale Packages KC","description":"\u003cp\u003eThese texture built UV Printed patches are unique way to bring your brand to life. We over print our UV Ink onto the patch material creating an embossed effect much like PVC patches and with multiple leatherette colors to choose, there is surely a color to coordinate with your design. Our patches are a maximum of 3\" wide or tall, whichever is greatest depending on your design. Typically we recommend about an 1\/8\" contour of leather to show around it like the images shown. Upon purchase you will need to send the high res image you would like to have printed along with the size specifications you prefer, any other sizes over the standard six square inches contact us directly. Your image should be high resolution, preferably in a vector file format (SVG, AI, etc) which allows us to easily convert it to a cut file. If your file is not considered high res or needs significant work there may be an additional charge of $15 to adjust your artwork.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe only use Lonestar Adhesive leatherette as their product is thicker, more durable, and has a stronger adhesive than anyone else on the market.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eApplication instructions:\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eOrdering Notes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAfter Purchase we will contact you for order details about what portions you would like raised, textured, etc.\u003c\/li\u003e\n\u003cli\u003ePurchase price includes basic setup.\u003c\/li\u003e\n\u003cli\u003eAfter purchase we will contact you to discuss your artwork and patch size requirements.\u003c\/li\u003e\n\u003cli\u003eTypically we do an 1\/8\" contour exposing the leather underneath creating a patch 1\/4\" larger than your design. But we can cut on the edge (also known as a \"kiss cut\"). If you prefer something different reach out and and discuss.\u003c\/li\u003e\n\u003cli\u003eDefault overall patch size is limited to ~6\" square dimensions (2\"x3\" for example). Anything over this may incur additional material surcharge. If needed, we will contact you and let you know.\u003c\/li\u003e\n\u003cli\u003eVector files are best but we can work with high resolution bitmaps as well.\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHats are not included\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOrder Name should be reflective of the name of the artwork or logo, please include this even if you have previously sent us the design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eIf \"Other\" is selected, this material is subject to availability and possibly longer processing time. A color swatch is included in the photo gallery to select your color. Enter it in the \"Other Color\" text box\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ink and Ember","offers":[{"title":"Rawhide","offer_id":43215061090378,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Glossy Black","offer_id":43215061155914,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Glossy White","offer_id":43215061188682,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Grey","offer_id":43232118014026,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Rustic","offer_id":43215061286986,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Saddle Tan","offer_id":43215061254218,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Dark Brown","offer_id":43232129351754,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Rawhide","offer_id":43232118046794,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Black","offer_id":43232118079562,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Charcoal","offer_id":43215061123146,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Flint","offer_id":43232118112330,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Sand","offer_id":43215061221450,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Olive","offer_id":43232118145098,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Heritage Walnut","offer_id":43232129384522,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true},{"title":"Other Leatherette","offer_id":43215061319754,"sku":null,"price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/CATPATCH.png?v=1767893802"},{"product_id":"uv-printed-leatherette-hat-patch","title":"Pepper Sombrero UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eAny hot sauce lovers out there? This Spicy Sombrero Pepper patch is a fun addition to any hat. Celebrate Cinco De Mayo, Tex-Mex cuisine or just because you like all things spicy.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43232119980106,"sku":"KCpatch-PEPPER","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2024-05-04KCpatch-PEPPER_14f66a19-aa67-43f3-8246-153c835f7e2c.jpg?v=1768843445"},{"product_id":"beer-mug-uv-printed-leatherette-hat-patch-mr01","title":"Beer Mug UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43245015924810,"sku":"KCPatch-BEERMUG","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2023-11-08KCPatch-BEERMUG.jpg?v=1768843839"},{"product_id":"neon-monkey-uv-printed-leatherette-hat-patch-mr01","title":"Neon Monkey UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43245027360842,"sku":"KCPatch-MONKEY3","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2023-12-09KCPatch-MONKEY3.jpg?v=1768844069"},{"product_id":"baseball-softball-bow-uv-printed-leatherette-hat-patch-mr01","title":"Baseball Softball Bow UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43245099843658,"sku":"KCPatch-BASESOFTBOW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2024-09-22KCPatch-BASESOFTBOW.jpg?v=1768846777"},{"product_id":"deer-flag-patriotic-uv-printed-leatherette-hat-patch-mr01","title":"Deer Flag Patriotic UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43245119537226,"sku":"KCPatch-DEERFLAG","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2024-10-19KCPatch-DEERFLAG.jpg?v=1768847396"},{"product_id":"heart-breaker-skateboard-uv-printed-leatherette-hat-patch-mr01","title":"Heart Breaker Skateboard UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003e80s Themed Heart Breaker Skateboard UV Printed Patch\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43251076333642,"sku":"KCPatch-HEARTBREAK1","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2024-02-13KCPatch-HEARTBREAK1.jpg?v=1769112209"},{"product_id":"80s-monkey-uv-printed-leatherette-hat-patch-mr01","title":"80s Monkey UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003e80s Themed Monkey UV Printed Patch\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43251077840970,"sku":"KCPatch-MONKEY2","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-02-27KCPatch-MONKEY2.jpg?v=1772207894"},{"product_id":"horseshoe-with-red-roses","title":"Horseshoe with Red Roses UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our stylish horseshoe rose patch for hats. This beautifully designed patch combines classic equestrian themes with vibrant roses, perfect for adding a unique touch to your favorite headgear.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327430099018,"sku":"KCPatch-DERBY3","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file.jpg?v=1769150124"},{"product_id":"charming-bow-accent-design","title":"Volleyball Bow UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eStylish hat patch designs like this charming volleyball bow patch elevate your accessories. Perfect for personalizing hats, this adorable bow adds a touch of flair and elegance to any outfit.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327430066250,"sku":"KCPatch-VOLLEYBOW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_ddce57f8-01f1-4058-9335-b432571d365e.jpg?v=1769150750"},{"product_id":"leprechaun-beer-celebration-leatherette-hat-patch","title":"Leprechaun Beer UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eShow your love for St. Patrick's Day with our vibrant Leprechaun hat patch. This whimsical patch featuring a leprechaun and his frothy beers is perfect for celebrating Irish traditions or adding a festive touch to any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429935178,"sku":"KCPatch-LEPRECCAMO","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_73e8d12e-1ccf-4e75-90da-5176b9e3ae0e.jpg?v=1769151353"},{"product_id":"colorful-floral-smiley-face-leatherette-hat-patch","title":"Colorful Floral Smiley Face UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the perfect hat patch for expressing your style. This cheerful Smiley Face patch adds a fun, vibrant touch to any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429804106,"sku":"KCPatch-SMILERETRO","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_bce81b91-8790-4ce6-a721-4af599a432cf.jpg?v=1769151613"},{"product_id":"wild-cowboy-skull-lifestyle-leatherette-hat-patch","title":"Wild Cowboy Skull UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the Wild and Free Skull patch for hats! This eye-catching patch features a rebellious skull cowboy design, perfect for celebrating freedom and individuality.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429705802,"sku":"KCPatch-WILDFREE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_a9234e9f-c86f-4bea-9aae-2af4f83c8ab6.jpg?v=1769151753"},{"product_id":"vibrant-horse-racing-excitement-leatherette-hat-patch","title":"Vibrant Horse Racing UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eElevate your hat game with this vibrant horse racing patch. Perfect for equine enthusiasts, this colorful patch adds flair and excitement to any cap.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429673034,"sku":"KCPatch-DERBY1","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-04-02KCPatch-DERBY1.jpg?v=1775146677"},{"product_id":"vibrant-butterfly-beauty-leatherette-hat-patch","title":"Vibrant Butterfly UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eExplore vibrant butterfly patches for hats that transform style. This colorful butterfly patch adds a unique flair to any headwear.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429574730,"sku":"KCPatch-BUTTERFLY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-02-27KCPatch-BUTTERFLY.jpg?v=1772207969"},{"product_id":"keepin-it-old-school-leatherette-hat-patch","title":"Keepin' it Old School UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eExplore our nostalgic Old School cassette patch for hats. Perfect for music lovers and vintage enthusiasts alike, this patch adds a unique flair to your favorite headwear.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429509194,"sku":"KCPatch-CASSETTE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_632bd5d5-eaf9-4fd9-b6a0-177af11e6a88.jpg?v=1769185276"},{"product_id":"fierce-demon-face-design-leatherette-hat-patch","title":"Fierce Demon Face Design UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDemon face patch for hats adds bold style and personality. Elevate your hat collection with this fierce, eye-catching patch design.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429476426,"sku":"KCPatch-DEVIL","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_b00d48d8-5616-4cf4-901c-f47569fc7d87.jpg?v=1769185398"},{"product_id":"floral-sugar-skull-art-leatherette-hat-patch","title":"Floral Sugar Skull Art UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eSkull patches are perfect for your unique hat style. This Floral Skull patch combines vibrant colors and intricate designs, ideal for celebrating Día de los Muertos or adding a touch of whimsy to any outfit.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429115978,"sku":"KCPatch-SKEL","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_a1fe694e-8796-4dc8-967b-c11b37116b5b.jpg?v=1769185954"},{"product_id":"retro-boombox-vibes-leatherette-hat-patch","title":"Retro Boombox Vibes UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eBoombox hat patch for music lovers and retro enthusiasts! This vibrant design adds a nostalgic touch to any hat, perfect for expressing your love of music.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429050442,"sku":"KCPatch-STEREO","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_9b81c4ba-eff0-47ca-84c4-df7a90e130c9.jpg?v=1769186086"},{"product_id":"irish-brotherhood-and-fun-leatherette-hat-patch","title":"Irish Brotherhood and Fun UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eSons of Ireland hat patch for proud heritage enthusiasts! This stylish patch features bold graphics celebrating Irish culture and camaraderie.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327429017674,"sku":"KCPatch-STPAT4","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-03-17KCPatch-STPAT4.jpg?v=1773776386"},{"product_id":"retro-sunglasses-with-palms-leatherette-hat-patch","title":"Retro Sunglasses with Palms UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCapture the essence of summer with this stylish sunglasses patch. Perfect for beach lovers, this vibrant patch brings tropical vibes to any hat, celebrating sunny adventures.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327428984906,"sku":"KCPatch-SUNGLASSES1","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_8e6bcb3e-b40e-4281-993c-2987d2a46b96.jpg?v=1769186302"},{"product_id":"colorful-dj-monkey-vibes-leatherette-hat-patch","title":"Colorful DJ Monkey Vibes UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eAdd vibrant style with this cool monkey hat patch! Perfect for music lovers and those who enjoy fun, colorful accessories.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327428952138,"sku":"KCPatch-MONKEY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_0861bd35-7a81-4c39-af54-6c999a09c98c.jpg?v=1769186421"},{"product_id":"colorful-melting-mouth-design-leatherette-hat-patch","title":"Colorful Melting Mouth Design UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover unique hat patches that express your style! This vibrant mouth patch, featuring a dripping design, is perfect for those who love bold fashion statements.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327428919370,"sku":"KCPatch-TONGUE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_66db80ab-e0fb-4056-9720-022f4d79b121.jpg?v=1769186424"},{"product_id":"american-flag-with-trees-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Forestry Flag UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eShop our unique American flag patch for hats today! This stylish patch features a stunning design with vibrant colors, perfect for outdoor enthusiasts and patriotic individuals alike.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327428264010,"sku":"KCPatchUV-FORESTRY","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_f25f4c99-ee60-46bd-8b73-3597b74f7493.jpg?v=1769189222"},{"product_id":"vibrant-rizz-street-style-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"RIZZ Street Style UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eElevate your style with this vibrant RIZZ patch! Perfect for expressing your unique personality on any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327428231242,"sku":"KCPatchUV-RIZZ","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_3db2919b-33fc-48b6-a110-0237f3fb960d.jpg?v=1769189364"},{"product_id":"eagle-with-american-flag-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Eagle with American Flag UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eShow your patriotism with this stunning Eagle hat patch. Featuring an eagle soaring against the American flag, this patch is perfect for honoring your love for America.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327428198474,"sku":"KCPatchUV-EAGLEFLAG","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-03-16KCPatchUV-EAGLEFLAG.jpg?v=1773676467"},{"product_id":"bold-colorful-slang-expression-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Bruh Slang UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eExplore unique hat patches that showcase vibrant creativity. This BRUH patch adds a playful touch to any casual outfit.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427674186,"sku":"KCPatchUV-BRUH","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_c5c9e598-2c2b-4fa0-93ac-305ec0f64d1b.jpg?v=1769189718"},{"product_id":"cowboy-riding-into-sunset-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Cowboy Riding into Sunset UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the ultimate cowboy hat patch for enthusiasts! This vibrant rodeo patch showcases a skilled rider against a stunning sunset backdrop, perfect for adding flair to your favorite hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427641418,"sku":"KCPatchUV-COWBOYSUNSETOUTLINE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-04-02KCPatchUV-COWBOYSUNSETOUTLINE.jpg?v=1775146924"},{"product_id":"retro-cowboy-riding-hat-patch-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Retro Cowboy Riding Hat Patch UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCowboy hat patch for Western enthusiasts and rodeo fans. This vibrant cowboy patch adds a touch of rustic charm to any hat, perfect for showcasing your love for the cowboy lifestyle.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427608650,"sku":"KCPatchUV-COWBOYSUNSETSTRIPE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-04-02KCPatchUV-COWBOYSUNSETSTRIPE.jpg?v=1775147008"},{"product_id":"patriotic-bison-in-sunglasses-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Patriotic Bison in Sunglasses UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our bold buffalo patch featuring American pride! This stylish patch is perfect for hat enthusiasts seeking unique, eye-catching accessories.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427379274,"sku":"KCPatchUV-COWBANDANA","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_95c155bb-eefa-4dc2-8696-1a3c6ce6a2b9.jpg?v=1769190199"},{"product_id":"cowboy-spirit-with-patriotism-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Cowboy Spirit Patriotism UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover our rugged cowboy hat patch featuring Americana flair. This bold design showcases a cowboy riding a bull against the backdrop of the American flag, perfect for country lovers and rodeo enthusiasts.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427346506,"sku":"KCPatchUV-COWBOYFLAG","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-03-19KCPatchUV-COWBOYFLAG.jpg?v=1773941826"},{"product_id":"patriotic-canned-beverage-art-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Patriotic Canned Beverage Art UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate American pride with our Patriotic Beer Cans patch. This unique hat patch showcases three iconic beer cans adorned with the Stars and Stripes, perfect for any occasion.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427313738,"sku":"KCPatchUV-FLAGBEERCANS","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_e426cef7-8efa-4955-bb05-24dd860e5e43.jpg?v=1769190201"},{"product_id":"patriotic-eagle-with-sunglasses-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Patriotic Eagle with Sunglasses UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eShow your patriotism with this stylish eagle patch. This bold and unique design features an eagle wearing sunglasses and a patriotic cap, perfect for enhancing any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427280970,"sku":"KCPatchUV-COOLEAGLE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_ff74b491-c8ca-4143-82ba-a6d44d5ad3da.jpg?v=1769190325"},{"product_id":"wild-west-cowboy-adventure-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Wild West Cowboy UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the Wild West Cowboy Club patch for hats! This unique patch adds a touch of rugged charm, perfect for rodeo enthusiasts and cowboy culture lovers.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427248202,"sku":"KCPatchUV-COWBOYCLUB","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_c7f28317-8f4f-4bf6-b544-a311e1956942.jpg?v=1769190326"},{"product_id":"wild-spirit-unleashed-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Wild Spirit Unleashed UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eStylish hat patch for bold fashion statements and customization. This \"Can't Be Tamed\" patch showcases a striking design perfect for Western-inspired outfits.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427182666,"sku":"KCPatchUV-CANTBETAMED","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_3dfa9bc1-3a45-449c-b38b-56ecc638a7b7.jpg?v=1769190329"},{"product_id":"deer-and-american-flag-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Deer American Flag UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover this stunning patriotic deer patch for hats. Featuring vibrant colors and an American flag backdrop, this patch celebrates nature and outdoor adventures.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427149898,"sku":"KCPatchUV-DEERFLAGANTIQUE","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-03-12KCPatchUV-DEERFLAGANTIQUE.jpg?v=1773331205"},{"product_id":"festive-highland-cow-charm-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Christmas Highland Cow Charm UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the perfect hat patch for animal lovers! This adorable Highland Cow patch features a charming design with festive bows, ideal for adding a whimsical touch to your favorite hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427117130,"sku":"KCPatchUV-CHRISTMASCOW","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_0b861aae-76d1-4700-a2e1-a15437eaa738.jpg?v=1769190462"},{"product_id":"shamrock-celebration-vibes-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Shamrock Celebration Vibes UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate St. Patrick's Day with this charming shamrock patch! Perfect for adding a festive touch to hats, this design showcases a playful clover character raising a pint.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427051594,"sku":"KCPatchUV-STPAT28","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_fcb0c71a-6300-40e5-8b28-a4eaf016d225.jpg?v=1769190462"},{"product_id":"cheers-to-wild-shenanigans-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Cheers to Wild Shenanigans UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eExplore our Bad and Boozy hat patch for a fun twist! Perfect for St. Patrick's Day or any celebration, this vibrant patch brings a playful spirit to your favorite hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327427018826,"sku":"KCPatchUV-STPAT19","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_0bdbc021-dfd1-4fad-8f54-502da2ca380e.jpg?v=1769190580"},{"product_id":"call-me-old-fashioned-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Call Me Old Fashioned UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eDiscover the perfect Old Fashioned patch for cocktail lovers! Elevate your hat game with this stylish and fun patch.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426986058,"sku":"KCPatchUV-OLDFASHION2","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_0f24cd23-5428-421a-b593-ea4c78fce5e3.jpg?v=1769190718"},{"product_id":"desert-skull-sunset-vibes-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Desert Skull Sunset Vibes UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eStylish skull patches elevate your hat fashion game instantly. This artistic bull skull patch captures rustic vibes and the wild spirit.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426953290,"sku":"KCPatchUV-BLKWHITESKULL","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_d0cb4b33-a953-4b55-9237-cde8c713b6a7.jpg?v=1769190718"},{"product_id":"st-patricks-day-cheers-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"St. Patrick's Day Cheers! UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCelebrate St. Patrick's Day with this fun Drinking Team patch. Perfect for showcasing your festive spirit and love for craft beer, this patch is a must-have accessory for any hat.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426887754,"sku":"KCPatchUV-STPAT13","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_5345e9ba-c9cc-4bc0-b96c-26ada39e538c.jpg?v=1769190719"},{"product_id":"rustic-boots-and-american-pride-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Flag Boots UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eShow off your pride with this American flag cowboy boot patch. Perfect for hat enthusiasts, this unique patch embodies Western culture and patriotism.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426822218,"sku":"KCPatchUV-FLAGBOOTS","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_5a33cf38-4b2d-4294-b835-f1aae5587fea.jpg?v=1769190840"},{"product_id":"cowboy-spirit-meets-patriotism-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Make America Cowboy Again UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eMake America Cowboy Again patch adds western flair. Perfect for cowboys, country music fans, and Americana enthusiasts, this patch is a great way to showcase your love for rugged style.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426789450,"sku":"KCPatchUV-AMERICACOWBOYAGAIN","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/2026-04-16KCPatchUV-AMERICACOWBOYAGAIN.jpg?v=1776361158"},{"product_id":"patriotic-bull-skull-design-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Patriotic Bull Skull Design UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003ePatriot-inspired hat patch for proud Americans. Show your love for the USA with this unique Texas longhorn skull patch!\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426756682,"sku":"KCPatchUV-FLAGHORNS","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_c54c5b81-ce0b-49ec-8c32-84ae4ec866cf.jpg?v=1769190971"},{"product_id":"cowboy-spirit-and-home-uv-printed-leatherette-hat-patch-mr01-leatherette-hat-patch","title":"Cowboy Spirit UV Printed Leatherette Hat Patch - MR01","description":"\u003cp\u003eCowboy-themed hat patches provide unique style and expression. This \"Home is Where You Hang Your Hat\" patch features vibrant designs perfect for any Western enthusiast.\u003c\/p\u003e\n\u003cp\u003ePrinted on Lonestar Adhesive's Premium Rawhide Leatherette with Durabull Adhesive.  Stock your hat bar with all of our premade patches!  \u003cspan style=\"text-decoration: underline;\"\u003eSearch \"MR01\" on this site to find everything that we (Ink and Ember) offer for a flat $5 shipping\u003c\/span\u003e (the more patches you buy, the more profitable your hat bar is!)\u003c\/p\u003e\n\u003cp\u003eThese patches are UV printed on leather to give a vibrant and unique image on the leatherette which is then laser cut precisely around the image and are great for hats, backpacks and anything you can imagine.   Hat not included.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePatches are sized to standard sizes for hats (approximately 2\" - 2.5\" tall or wide) - if you need specific sizing on a patch, pleaes message us before purchasing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeatherette is a vegan leather with heat activated adhesive already on the back.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eAPPLICATION INSTRUCTIONS : \u003c\/span\u003e\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan\u003ePreheat hat in hat press for 30 seconds at 325°F with thin silicone sheet between the hat and platen\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhile heating hat, heat the back of the patch with a heat gun on low for 15 to 30 seconds until you see the adhesive change and the patch may begin to curl (reflective, more tacky) (note: it's a heat gun not a blow drier). This shows that the print has become more pliable and ready to attach to the hat.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWhen 30 seconds is over remove the hat press heater and silicone pad from the hat and apply the patch to the hat in desired location, careful it's hot. \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePress again for 30 seconds with light to medium pressure with a silicone pad on top of the patch and hat. Check edges of the patch and make sure it stuck, if not adhered on the edges, repress the hat until you get desired results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\n","brand":"Ink and Ember","offers":[{"title":"Default Title","offer_id":43327426723914,"sku":"KCPatchUV-HANGHAT","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/1611\/8602\/files\/file_9896a777-884f-4f49-a684-a17e6d3d02a0.jpg?v=1769190972"}],"url":"https:\/\/www.ink-and-ember.com\/collections\/uv-printed-items.oembed?page=4","provider":"Ink and Ember","version":"1.0","type":"link"}